Perhaps you should wait for a more expert opinion, but here's the settings I used:
Discharge: 10A. Charge: as fast as you can without exceeding 110F on the temperature probe. For me, that was 8A.
Cutoff: as low as you can without a single cell suffering reversed polarity. I guess it depends on how well-balanced your pack is?
Time: I used 15min.
Cycles: Cycle the sticks until they stop improving. How about five blind cycles, make a spreadsheet, and see if there are any sticks you need to keep cycling?
Good luck, and congrats on DIY'ing your battery refurbishment. I found it rewarding to DIY. Please post your results when you finish with all 20 sticks.
|
