Aveo/Daewoo Matiz/Kalos Rear Spring Upgrade

[freezin4]

This is a set of rear springs from a low mileage '04 Chevy Aveo / Daewoo Kalos/Matiz. These are the springs to use as upgrade for the Insight.

Most people cut one coil out before install. There is lots of info on the forum such as: Insight rear springs

This set comes with the upper and lower rubber bushings.

$65 shipped in US lower 48. PM ME IF INTERESTED.

spring1.jpg

spring2.jpg

spring3.jpg

spring4.jpg

[Gadget01]

Interested-- PM sent

[Gadget01]

Received the springs on Saturday, installed today. WOW... what a nice difference that makes.




Thank you

[talonmike]

Did you cut 1 coil?

[freezin4]

Yes, he cut one out.

[Gadget01]

Originally Posted by freezin4

Yes, he cut one out.

True story.

I'm going to let it sit a little high for now to see if if will settle a bit, but I would like it closer to stock height and might cut off another ring.

[Willie Williford]

I used the Black/White springs. Didn't cut anything.
Measurement from bottom of skirt to ground is now 12".
The H on the cap is now visible.
It changed the front steering feel to "tighter", and I love it.

HTH
Willie

[talonmike]

Originally Posted by Willie Williford

I used the Black/White springs. Didn't cut anything.
Measurement from bottom of skirt to ground is now 12".
The H on the cap is now visible.
It changed the front steering fell to "tighter", and I love it.

HTH
Willie

Same thing here.