Template/Measurments for the hatch decals?

**ddhollon** · 01-26-2012, 10:48 PM

Does anyone have a template to put all 3 of the hatch decals on? ("Insight", "H", & "Hybrid")

I found them new at g1parts.com:
75701-S2H-000ZA
75723-S3Y-000ZA
75731-S3Y-A00

The previous owner took them all off and replaced them with 2 Apple decals! How awful right!?

Since my hatch is completely clean and has no residue I have no way of knowing exactly where they each go. I know the general location of each but I want it to look nice and clean like the factor.

Measurements or templates would be great! Thanks!

Eithieus · 01-26-2012, 11:28 PM

If it would help, I can take a couple pictures of the decals with a tape measure up to it for size. Let me know and I can do it in the morning.
Sarah

**ddhollon** · 01-26-2012, 11:32 PM

Sarah - Yes that would be very helpful! Thank you very much. No hurry though as they won't be in for a couple of days.

gilbertguy · 01-27-2012, 12:00 AM

Mine were in bad shape so I replaced all three of mine at the same time, when you get them the two side stickers are on paper backing that is cut to fit the corners of the glass. You use that precut paper is a guide along the bottom edge and to the edge of the glass as a position template. The H in the middle also has backing paper that sits on the bottom edge of the glass as a guide and has a center reference point for centering. Line everything up and slowly work the decal from the bottom edge corners and you should be okay. Watch for air bubbles.

New Hatch Decals

Need4Speed · 01-27-2012, 06:26 AM

Sarah:

Do you actually currently own 5 Insights at this time?

Eli · 01-27-2012, 10:37 AM

I'm way behind.

lol

**Hybrid-Battery-Repair** · 01-27-2012, 01:03 PM

They come with spacers in the decal backing. Just line up the notch with the edge of the hatch and peel. The center one requires you finding the exact left-right center of the hatch.

Quote:

Originally Posted by ddhollon

Does anyone have a template to put all 3 of the hatch decals on? ("Insight", "H", & "Hybrid")

I found them new at g1parts.com:
75701-S2H-000ZA
75723-S3Y-000ZA
75731-S3Y-A00

The previous owner took them all off and replaced them with 2 Apple decals! How awful right!?

Since my hatch is completely clean and has no residue I have no way of knowing exactly where they each go. I know the general location of each but I want it to look nice and clean like the factor.

Measurements or templates would be great! Thanks!

**Hybrid-Battery-Repair** · 01-27-2012, 01:04 PM

I have OWNED 5 Insights, but not at the same time...

Quote:

Originally Posted by Eli

I'm way behind.

lol

**ddhollon** · 01-27-2012, 09:26 PM

Thanks everyone!
I'll be glad to get those replaced back on the hatch. It just looks to blank without them.

I only have 1 Insight but that is all I need! Not 3 or 5 HaHa!

Eithieus · 01-29-2012, 12:02 PM

I couldn't get the pictures to upload here, so I made a album on my FB account. Let me know if you have any trouble viewing them here. Hope it helps!
https://www.facebook.com/media/set/?...4910937&type=1

Sarah