Quote:
Originally Posted by jmfmft
I recently got my first "trophy" and have heard that I can "reset" the econ meter to start over. Can't figure out how to do that? Anyone have any insight (no pun intended) on how to do that if it can be done???
Thanks!
Jane
|
Insight from the Insight manual

:
P. 310
Reset the System
The following procedure clears all leaves and your lifetime points. This procedure must be followed exactly.
Turn the ignition switch to the ON (II) position. Confirm that the ECON mode is OFF. If it is OFF, proceed to step 1. Do run the engine.
If the ECONmode is on, press and release the ECONbutton to turn it off. You also need to turn the ignition switch off.
Turn the ignition switch to the ON (II) position again. Do run the engine.
Complete the following steps within 30 seconds:
1- Press and release the brake pedal at least two times. The ambient meter color changes from blue to green .
* The ambient meter color changes only if the multiinformation display’s meter color change setting is on. (See page 103.)
2- Press and release the ECON button two times (ECON mode comes on, then goes off). The ambient meter color goes off, and the accumulated data is cleared.
3- Turn the ignition switch to the LOCK (0) position.
P.S. Welcome to InsightCentral