Husco out of business, but some inventory left

[tubesguy]

Hi folks -

I finally, after many ebay battles, have acquired an Insight, and I decided to add a few things right away.

I've seen the threads on Husco armrests, and decided to order one. I followed a link to their website, and found a message indicating that, as of August 12, they've closed down the business. They do apparently still have old inventory to sell, and I managed, I hope, to order one, but if you've been thinking about it, now's definitely the time. - Pat

[Wayne M]

All I got at http://www.husco.com was a 'closed sign'

[Resist]

They still want over $80 for an Insight armrest. I emailed them but got no response.

[Jim]

Originally Posted by Wayne M

All I got at http://www.husco.com was a 'closed sign'

That wasn't there yesterday or day before.... I guess they're done.

[originalbadbob]

I sure do like my J.C. Whitney armrest for $40. I had to modify the mount a little (shorten it) and install the mount backwards on the armrest, but it has storage in it and I didn't drill any holes in the stock console thingy. I used the two screws at the back and bought a piece of all thread and a couple of acorn nuts which rest on top of the console towards the front. I put a piece of plastic tubing on the all thread and it works nicely.
robert

[devin1955]

Any chance you could quote a part number or maybe even a link to the armrest on JC Whitney's web site? I just went there and looked and didn't see anything appropriate for the Insight. Besides, I never can seem to find what I'm looking for on their site anyway.

[gobuchul74]

I took a look at the JCWhitney site and it looks like this armrest will work. Use this SKU# ZX135862T. It comes in black or gray.

[originalbadbob]

It's the "PADDED & UPHOLSTERED CENTER ARMREST STORAGE CONSOLE" listed in their catalog or online. Part number: ZX135858A for the black one and ZX135862T for the gray one. http://www.jcwhitney.com. I have the gray one, and although it's not a perfect match on the color, nobody has noticed that it isn't stock. They are 39.99 ea plus shipping and handling (about $10 for me in SC.) It took a couple of trial fittings at first to get it where I wanted and it is kind of snug for the seat back adjustments, but I don't change them anymore anyway. You just have to slide your hand flat in between to get to the lever.
The top is held to the base with wing nuts and screws, and is adjustable. I cut the bottom of the legs off 1-1/4" with a hacksaw (doesn't take long) and had to drill 4 holes. 2 at the back where it attaches with the stock console screws and 2 at the front where I put the all thread through it so it wouldn't slide down over the tunnel, and the plastic tube is placed over the all thread so it won't chafe the console in case I want to remove it. You need to adjust the base so it is the same width as the armrest and attach it with the curved legs at the rear. The first time I attached it, I did it as the picture and the rear hole lined up with the stock console holes. I found that I wanted it to go forward and lower (about the thickness of the hinged top).
I'll post dimensions later (I'm at work now)
robert

[Wasabi owner]

Incredible, I was just going to order one. I thought about ordering one a few months ago but thought $80 was a bit greedy. I guess some other people thought the same thing. Husco's potential customers.

I think I will make my own. Been thinking about it and it was my back up plan.

[Resist]

I finally got a reply from them, they will not discount their remaining stock. Guess I will pass on it then, $80 is to much for an armrest..