POA5E=Motor Current U phase Signal Circuit Low Input
POA65=Motor Currrent W Phase Signal Circuit Low Input
P1559=Motor Commutation Sensor A Circuit Low Input
These are from the Honda Service Manual, which you should have acquired by now if you want to troubleshoot your car
The Service manual has troubleshooting steps for each of these faults, which are too multiple and detailed to type, but all 3 codes start with "Reset the MDM." To do that, "Turn the ignition switch off, and remove fuse #18 BACK UP (7.5A) fuse from the under-dash fuse/relay box for 10 seconds.
I'm an MT guy so don't know much about CVTs. This may work or it may leave you with even more codes and the necessity of resetting the Transmission Control Module.
I advise you to download the IMA section of the service manual from the site here.
You want to download the IMA section 12 through page 70, and the transmission section 14-178.
Sorry I can't be more helpful. Maybe a CVT owner/expert will check in.