YO YO YO CVT fliters? - Insight Central: Honda Insight Forum
 
Go Back   Insight Central: Honda Insight Forum > 2nd Generation Honda Insight Forum > Honda Insight Forum 2nd-Gen Discussion

Insightcentral.net is the premier Honda Insight Forum on the internet. Registered Users do not see the above ads.
Reply
 
LinkBack Thread Tools
Old 12-17-2018, 03:41 AM   #1 (permalink)
Member
 
Join Date: Mar 2018
Location: ca
Posts: 74
Default YO YO YO CVT fliters?

Hey, i was snooping on the forums and i just saw that apparently there is a filter inside the pan of the cvt?? Is this right? cause i replaced the in-line filter for the cvt i thought that was the only one..... car has 71k miles and i changed the cvt and in line filter at 63k or so... when should i change the pan filter? 100k?

this is the part # the user had listed
25430-PLR-003 (External Filter) * replaced this one*
25420-RBL-003 (Pan Filter)
90471-PX4-000 (Washer)
21814-RPS-000 (Gasket)

Also....... when is the fuel filter suppose to be replaced? my car has 71k miles not sure what should be done... spark plugs too?


my car 2010 insight


-------- another topic ----
I'm gonna get neon under glow cause why not..... it's never been done here apparently i looked all over so ill be the first with a 2nd gen insight with under glow. I have stock alloy rims and my car is metallic grey im thinking of getting the inside of the rim black and the outside spokes white or alloy showing like a machined face look. My plan is to have the color white running since other colors are just ugly with grey.
Nice or rice?





Selling stock OEM glossy GPS/radio dash trim (didn't fit my head unit) pm me

Last edited by Ali2627; 12-18-2018 at 04:34 AM.
Ali2627 is offline   Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
Old 12-17-2018, 11:02 PM   #2 (permalink)
Senior Member
 
gms24ru's Avatar
 
Join Date: Mar 2017
Location: Krasnoyarsk, Russia
Posts: 210
Default

Quote:
Originally Posted by Ali2627 View Post
Hey, i was snooping on the forums and i just saw that apparently there is a filter inside the pan of the cvt??
.... spark plugs too?
I changed the external filter CVT, washer and gasket at 100K. Also made the adjustment of the valve clearances and replaced the spark plugs.
Replacing the internal filter CVT is not required by the Honda Insight ZE2 Service Manual, only cleaning with compressed air.

The internal filter changes when a failure of the CVT, when replacing parts of the CVT or when overhauling.
In case of an irregular oil change, it is recommended to wash the internal filter and make 2-3 partial replacements.
All car owners in Russia, who changed the internal filter to a new part, did not notice the difference. IMHO, if you have extra money you can change - it will not be worse.
You can clean the CVT-cooler with special equipment, but this is also a waste of time and money.

The main thing: regular change the CVT-fluid, after 40K kilometers.

Quote:
Originally Posted by Ali2627 View Post
... when is the fuel filter suppose to be replaced? my car has 71k miles not sure what should be done... spark plugs too?
Replacing the fuel filter is also carried out every 40K kilometers.
In my car, I changed the fuel filter to 100K, after which the consumption decreased.
https://www.insightcentral.net/forum...ml#post1392771
__________________
Honda Insight II 2010 RHD Silver G-Edition Japan
Electric Train H710MK124RU Japan-Krasnoyarsk

To view links or images in signatures your post count must be 2 or greater. You currently have 0 posts.

Telegram:

To view links or images in signatures your post count must be 2 or greater. You currently have 0 posts.
gms24ru is offline   Reply With Quote Quick reply to this message
Old 12-17-2018, 11:42 PM   #3 (permalink)
Member
 
Join Date: Mar 2018
Location: ca
Posts: 74
Talking

Quote:
Originally Posted by gms24ru View Post
I changed the external filter CVT, washer and gasket at 100K. Also made the adjustment of the valve clearances and replaced the spark plugs.
Replacing the internal filter CVT is not required by the Honda Insight ZE2 Service Manual, only cleaning with compressed air.

The internal filter changes when a failure of the CVT, when replacing parts of the CVT or when overhauling.
In case of an irregular oil change, it is recommended to wash the internal filter and make 2-3 partial replacements.
All car owners in Russia, who changed the internal filter to a new part, did not notice the difference. IMHO, if you have extra money you can change - it will not be worse.
You can clean the CVT-cooler with special equipment, but this is also a waste of time and money.

The main thing: regular change the CVT-fluid, after 40K kilometers.


Replacing the fuel filter is also carried out every 40K kilometers.
In my car, I changed the fuel filter to 100K, after which the consumption decreased.
https://www.insightcentral.net/forum...ml#post1392771

I see I see, I did notice alot of metal shavings in the drain plug when i did the change so i assume the in pan magnets are full too. (not a good sign huh....)
I guess i'll skip out on the filter for now but i assume replacing the spark plugs will help reduce the idle from jumping around 700rpm then drops to 400 then spikes up to 1k rpm this happens sometimes and im not sure why ... i've read the egr value is to blame but there is no check engine light and these insights are advance enough to know if an issue is occurring...........input?
Ali2627 is offline   Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
Old 12-18-2018, 01:06 AM   #4 (permalink)
Senior Member
 
gms24ru's Avatar
 
Join Date: Mar 2017
Location: Krasnoyarsk, Russia
Posts: 210
Default

Quote:
Originally Posted by Ali2627 View Post
... the idle from jumping around 700rpm then drops to 400 then spikes up to 1k rpm this happens sometimes and im not sure why ...
Clear EGR-valve + clear throttle valve + replace fuel filter + learning engine at idle. And troubles will go away.

Quote:
Originally Posted by Ali2627 View Post
I did notice alot of metal shavings in the drain plug when i did the change so i assume the in pan magnets are full too. (not a good sign huh....)
I too, have magnets with a small amount of metallic dust, but this is normal - when the mechanism is in operation, there is necessarily a production of metal.
But if you see large particles of metal, such as chips, broken pieces, this is a cause for concern.

Oh, I almost forgot.
If you replace the fuel filter, take a photo of the condition of the old filter element. Some claim that the fuel filter does not need to be changed in the USA, because gasoline is like a baby’s tear.
__________________
Honda Insight II 2010 RHD Silver G-Edition Japan
Electric Train H710MK124RU Japan-Krasnoyarsk

To view links or images in signatures your post count must be 2 or greater. You currently have 0 posts.

Telegram:

To view links or images in signatures your post count must be 2 or greater. You currently have 0 posts.

Last edited by gms24ru; 12-18-2018 at 01:19 AM.
gms24ru is offline   Reply With Quote Quick reply to this message
Old 12-18-2018, 01:58 AM   #5 (permalink)
Member
 
Join Date: Mar 2018
Location: ca
Posts: 74
Default

Quote:
Originally Posted by gms24ru View Post
Clear EGR-valve + clear throttle valve + replace fuel filter + learning engine at idle. And troubles will go away.


I too, have magnets with a small amount of metallic dust, but this is normal - when the mechanism is in operation, there is necessarily a production of metal.
But if you see large particles of metal, such as chips, broken pieces, this is a cause for concern.

Oh, I almost forgot.
If you replace the fuel filter, take a photo of the condition of the old filter element. Some claim that the fuel filter does not need to be changed in the USA, because gasoline is like a baby’s tear.


Will do, so anyone got any idea of why i have stupid idle that jumps around sometimes when im sitting in a drive-thru. haha

Last edited by Ali2627; 12-18-2018 at 02:51 AM.
Ali2627 is offline   Reply With Quote Quick reply to this message
Old 12-18-2018, 11:39 AM   #6 (permalink)
Senior Member
 
Join Date: Jan 2011
Location: Southern California
Posts: 1,634
Default

Perform the idle relearn procedure:

https://goo.gl/images/wUsFBe
egads is offline   Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the Insight Central: Honda Insight Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:
Location (Required)
Where you live
Insurance
Please select your insurance company (Optional)

Log-in


Thread Tools

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Powered by vBadvanced CMPS v3.2.3

All times are GMT -4. The time now is 03:05 PM.



Powered by vBulletin® Copyright ©2000 - 2019, vBulletin Solutions, Inc.
User Alert System provided by Advanced User Tagging (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.