Insight Central: Honda Insight Forum - View Profile: KLR3CYL
 
Go Back   Insight Central: Honda Insight Forum

Insightcentral.net is the premier Honda Insight Forum on the internet. Registered Users do not see the above ads.

KLR3CYL KLR3CYL is offline

Moderator

Visitor Messages

Showing Visitor Messages 1 to 10 of 37
  1. jbyoungis@gmail.com
    06-01-2019 07:51 AM - permalink
    [email protected]
    Scott, Good Morning.
    Thank you for your kind words the other day. I appreciate what's happening on this site and the commitment the members have to this little gem of a car.
    Having been in the "service business" I too have had customers like our "friend". I grew 3 blocks from Indiana University and encountered people that felt like they were better, smarter, stronger than everyone else because of the letters after their name. Granddad used to call it "so smart they can't pour p*ss out of a boot with instructions on the heel". Anyway I continue to search for my Insight. I am looking at one in corrosion prone South Bend In. It has your belly pan on it. I'm still considering jumping on an cheap flight to Florida and buying one there to drive back. Thanks for all you contribute here, I'm learning alot reading all the past and current posts.
    Happy Motoring!
    J.B. Young
  2. NathanRatPatrol
    03-10-2019 09:09 PM - permalink
    NathanRatPatrol
    Hi! I was advised by member Jesse to contact you about my rear hatch issue. Nothing happens unless I jumper the ORN(pin 3) to the BLK(pin 6) bypassing the hatch unlock switch. Then the TLC just whirs, which is an obvious fix. Have you run across failed Hatch Lock/Unlock switches, or is it something I can clean? I haven't disassembled anything yet, waiting for the TLC to show up. ASE Master Mechanic here, btw, just never worked on an Insight until one was given to me in November
    Thanks,
    Nathan Moore,
    2063801876
  3. JoeBicycles
    01-16-2019 02:11 AM - permalink
    JoeBicycles
    Hey Scott, I bought a 2004 Insight in phoenix a couple months ago somewhat impulsively. It's a CVT but I'm ok with that for now. Everything seemed great when I test drove the car. IMA fully charged, no check engine light. then a couple days after I got it home the CEL came on, and then a day or two later the IMA light came on and now I'm sort of lost about what to do. A couple of people on the 1st Gen forum support me taking the car to you and spending the night. I'd like to learn more, I'm a mechanical engineer and I have reasonable skills with tools but I don't want to make big errors with the battery, grid charger, etc. Any initial advice on skilled people in Phoenix ? Or when should I drive to Covina to see you? Thanks, Joseph
  4. BongoBennie
    10-08-2018 07:39 PM - permalink
    BongoBennie
    Hey, good talking to you today... I went out and gave the car a good evaluation and I think I'm going to ask for just a silver hood and any color core support.
  5. Quackman40
    08-17-2018 12:35 PM - permalink
    Quackman40
    Hello Sir,

    Stuart here in Maryland. Thanks for replying to my suspension repair thread. So are you the guy who runs Hybrid Revolt??

    I need a pair of the Gaz shocks. So if I send you $240 on paypal, you can ship em out to maryland for me?? I haven't used paypal in a while but should be able to figure it out.

    Thank you. Youre saving me 100 vs what I saw on ebay.
  6. cornstocks
    08-05-2018 12:41 AM - permalink
    cornstocks
    Finally found your page, how do I get more information on a 2000 Honda Insight MT rebuild? I have 230k on the transmission and Im beginning to hear some funky noises.

    Thank you,

    cornstalks
    [email protected]
  7. ddmme
    07-07-2018 08:04 AM - permalink
    ddmme
    Do you have any belly pans available for a 2003 m/t?
  8. 2000silverstone
    06-24-2018 09:10 PM - permalink
    2000silverstone
    Hi Scott,

    I am looking for the a-pilar moulding clips. Just wondering if you had a set available and could ship to Vancouver, Canada.

    Thanks,

    Marcus
    [email protected]

    Also interested in floor mats/cargo mat or rear speaker grills and base if you have anything
  9. rathacat
    06-16-2018 01:06 PM - permalink
    rathacat
    Hi Scott,

    I am interested in your aluminum belly pans. I live in Patterson, CA (Modesto area) and have 2 gen 1 Insights, a 2000 silver (Typhoon) and 2001 blue (Hurricane). We live in a rural mountain area with dirt and gravel roads, which has been rough on the OEM belly pans. The 2001 blue has lost most of the pan in front. I'd like to fit that one first, see how things go, then fit the silver. Can you give me a price quote for both, including shipping?
    Thanks in advance.

    rathacat
  10. Zedifier
    05-27-2018 12:34 PM - permalink
    Zedifier
    Hi Scott, I'm interested in purchasing your trailer hitch. I have a '01 Insight (CVT). Mostly looking to use it for a bicycle rack, and occasionally a 1-spot light-weight motorcycle trailer.

    If you would be willing to bring it and install at InsightFest 2018 in Madison, WI, I will be there for that, and I would be happy to pay you for your time as well.

    If you already have a full schedule at InsightFest, then I would be willing to pay shipping to Appleton, WI 54914

About Me

  • About KLR3CYL
    Biography
    ASE body & paint master technician for over 20 years, have been in repair for 30+ yrs.
    Location (Required)
    Upland, CA/Covina, CA
    Interests
    Cars, construction, travel, food, boats, water sports & bicycles
    Occupation
    Mechanical & body shop
  • Signature
    Silver 2000, MT 160,000mi, RE92's, S2000 leather steering wheel
    Silver 2002,CVT 187,000mi
    Blue 2002,MT 126,000mi, RE92's, S2000 leather steering wheel
    Red 2002,MT 196,000mi, RE92's, new rear springs, GAZ shocks
    Citrus 2000,MT 182,000mi, MIMA, RE92's, S2000 leather steering wheel, Japanese seat covers.
    Simple grid charger SC03
    New rear coil springs available, PM me.
    One piece aluminum underbody panels.
    PayPal: [email protected]

Statistics

Total Posts
Visitor Messages
General Information
  • Last Activity: Today 12:52 PM
  • Join Date: 05-04-2013
  • Referrals: 4

Friends

Showing Friends 1 to 10 of 24

Mentions

04-10-2019
01:45 PM - KLR3CYL mentioned jime in post Front strut
...ing room floor. jime: Iím sure other typ...
03-25-2019
07:32 PM - *sean* mentioned KLR3CYL in post Air Fuel Ratio Sensor Fun
...namb and which KLR3CYL diagnosed as being c...
01:30 AM - *sean* mentioned KLR3CYL in post Air Fuel Ratio Sensor Fun
...64513 which KLR3CYL diagnosed as caused ...

Quotes

06-19-2019
07:44 AM - atikovi quoted KLR3CYL in post How much gas left with zero bars on gauge?
So you started this thread a...
06-18-2019
07:05 PM - PTA2PTB quoted KLR3CYL in post How much gas left with zero bars on gauge?
I usually drive until no bar...
06-05-2019
02:55 PM - SgtUSMC2012 quoted KLR3CYL in post Need to replace Ballast resistor! Where to buy?
Iíve got one Iíll sell. ...
05-31-2019
12:51 PM - ADDvanced quoted KLR3CYL in post Rust-bucket Insight. Run away?
@jbyoungis ADDvanced, like ...
05-28-2019
04:28 PM - mpg_numbers_guy quoted KLR3CYL in post Rear hatch won't open, can't remove mechanism
Is there space to undo the t...
05-23-2019
07:06 PM - *sean* quoted KLR3CYL in post Engine ECU wet/corroded
The ECUs all look the same f...
05-22-2019
09:00 PM - *sean* quoted KLR3CYL in post Engine ECU wet/corroded
2000 & 2001 are the same if ...
03:02 PM - dorri732 quoted KLR3CYL in post Engine ECU wet/corroded
2000 & 2001 are the same if ...
05-19-2019
04:20 PM - Josch quoted KLR3CYL in post Shifting Problems After ISB Replacement
When reassembling did you ma...
03:07 PM - Josch quoted KLR3CYL in post Shifting Problems After ISB Replacement
Did you only do the ISB & se...
05-18-2019
01:31 AM - boojum quoted KLR3CYL in post Today
That canít be the whole stor...
04-28-2019
01:31 PM - retepsnikrep quoted KLR3CYL in post Oh no can't make it go $$$
My recommendation is to make...
04-16-2019
10:30 AM - ADDvanced quoted KLR3CYL in post Deleted Posts
04-15-2019
02:52 PM - 2000 quoted KLR3CYL in post Factory Tool Kit
I can fill your request. I...
04-10-2019
11:12 PM - Bazzetta quoted KLR3CYL in post Bicycle rack for 2005 insight
I started on a bike rack/hit...
04-06-2019
09:19 PM - jime quoted KLR3CYL in post Front strut
The struts are available fro...
03-14-2019
10:07 PM - bvad8486 quoted KLR3CYL in post Maxx volt grid charger Connector
Thanks Scott, I'll check it ...
03-08-2019
02:03 PM - Rainsux quoted KLR3CYL in post
03-04-2019
01:44 PM - skwiggly quoted KLR3CYL in post WTB: R/H silver fender skirt
Thanks Scott! Could you PM m...
02-24-2019
07:13 AM - brucepick quoted KLR3CYL in post 2001 MT with Engine problems and stuck rear hatch
...read, by Scott, aka KLR3CYL. When you turn the ...

All times are GMT -4. The time now is 02:27 PM.



Powered by vBulletin® Copyright ©2000 - 2019, vBulletin Solutions, Inc.
User Alert System provided by Advanced User Tagging (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.