JDM Internavi Mitsubishi NH167L replacement - Insight Central: Honda Insight Forum
 
Go Back   Insight Central: Honda Insight Forum > 2nd Generation Honda Insight Forum > Modifications and Technical Discussions

Insightcentral.net is the premier Honda Insight Forum on the internet. Registered Users do not see the above ads.
 
 
LinkBack Thread Tools
Old 12-24-2017, 06:40 PM  
Member
 
Join Date: Jul 2017
Location: Ireland
Posts: 81
Default JDM Internavi Mitsubishi NH167L replacement

So Santa was nice to me and I got a double-DIN Android car head unit with an oversized 10.1" screen and lots of options to replace the aforementioned radio.
I have almost everything I need, I even have a Honda-to-ISO adapter and a Honda-to-standard antenna adapter.
But where on the Honda/Mitsubishi NH167L side will I find:
a) the rear view cam signal
b) the steering wheel control wires/signals

If anyone needs the Mitsubishi NH167K, it will be given to good hands once I managed to pry it out of the car and replace it with the droid.
Corkonian is offline   Quick reply to this message
Sponsored Links
Advertisement
 
Old 12-25-2017, 07:40 AM  
Member
 
Join Date: Jul 2017
Location: Ireland
Posts: 81
Default

How hard can it be to remove the stock radio?
a) Remove the cover containing the cigarette lighter and the AV-in
Check
b) Remove the access cover from the small compartment above the lighter
Check
c) Locate and remove the screw that holds the radio
Check
d) Remove glove compartment and push radio out
erm...
Won't budge.
Push again.
Nothing.
It's cold, dark, wet and I am frustrated.
Is there something missing?
I even tried to pull the radio out, using the display as a handle ...
Nothing.

What am I missing?
Corkonian is offline   Quick reply to this message
Old 12-25-2017, 02:03 PM  
Senior Member
 
Join Date: Jan 2011
Location: Southern California
Posts: 1,634
Default

So you used the instructions in this sticky?

https://www.insightcentral.net/forums...ock-radio.html

There may be some additional step for the NAV unit. You might check out forums for other Honda vehicles that would have used a similar NAV unit.
egads is offline   Quick reply to this message
Sponsored Links
Advertisement
 
Old 12-25-2017, 02:58 PM  
Member
 
Join Date: Jul 2017
Location: Ireland
Posts: 81
Default

Merry Christmas.
Exactly those steps, but the housing won't separate from the dash. It fits so tightly, that I can't fit a spudger to pry it open.
WTF?
I may have to apply more force. Usually I try to avoid doing the Clarkson to sensitive equipment, but I may have to go for a bigger hammer, indeed.

Is the pinout of the Nav/Radio connectors documented anywhere?
Corkonian is offline   Quick reply to this message
Old 12-26-2017, 04:24 AM  
Engine-Off-Coast
 
Natalya's Avatar
 
Join Date: Oct 2015
Location: Atlanta
Posts: 1,349
Default

Take like a wooden rod... I used a hammer but like the handle part of it not the head... there's like a metal bar that kinda goes down on the glovebox side of the radio. I used that as a fulcrum and propped the hammer handle against it in the middle and the end of the handle against the back of the radio and pushed really hard. Eventually one of the plastic clips will pop out, and then the whole thing will go.
__________________

To view links or images in signatures your post count must be 2 or greater. You currently have 0 posts.
Natalya is offline   Quick reply to this message
Old 12-26-2017, 12:50 PM  
Senior Member
 
Join Date: Jan 2011
Location: Southern California
Posts: 1,634
Default

As far as pin outs go, I always recommend using wiring adapters. (Metra is a major supplier of them) professionals use them because it is way faster and trouble free. It also make things reversible.
I did find quite a bit of information by Googling “ 2010 Honda navigation pin out”.
I would think that there must be folks in Australia & New Zealand That have replaced the head units from JDM Honda vehicles. See if you can find a Civic (for instance) forum from down under that might give you valuable information.
egads is offline   Quick reply to this message
Old 12-27-2017, 05:03 AM  
Senior Member
 
gms24ru's Avatar
 
Join Date: Mar 2017
Location: Krasnoyarsk, Russia
Posts: 210
Default

I pulled from within, acting with the lever to the place as it is designated here:

Also:
Remove unit.
https://ameblo.jp/bigsun927/entry-10672336965.html
???????????????????? | ??? ????? by ???? - ????
?????? ??????? ????????? , ?????????? ?? ?????!!! - ????????? - ????? ????????? ??????????? Honda Hybrid
https://www.drive2.ru/l/455156033531153039/
????????????????????? | ??? ????? by ??? - ????
Android plug multi-wheel.

Try search words in Japan:
honda インサイト ナビゲーションのモジュールの除去
OR
honda インサイト ラジオを取り外してください

インサイト - Name "Insight" in Japan
__________________
Honda Insight II 2010 RHD Silver G-Edition Japan
Electric Train H710MK124RU Japan-Krasnoyarsk

To view links or images in signatures your post count must be 2 or greater. You currently have 0 posts.

Telegram:

To view links or images in signatures your post count must be 2 or greater. You currently have 0 posts.

Last edited by gms24ru; 12-27-2017 at 05:17 AM.
gms24ru is offline   Quick reply to this message
Old 12-27-2017, 11:27 AM  
Member
 
Join Date: Jul 2017
Location: Ireland
Posts: 81
Default

Got the JDM headunit out and the new Unit in.
Almost without scratches.
Only when the wires to the hazard light caught, I scratched the panel.
****.
Still, the Japonese Radio Antenna connector is square - not round - and it has the pin in a different location.
Where do I get an Antenna adapter to standard that fits?
Corkonian is offline   Quick reply to this message
Old 12-27-2017, 12:39 PM  
Member
 
Join Date: Jul 2017
Location: Ireland
Posts: 81
Default

WTF? The JDM loom has a square radio HF connector. My adapter has a round HF connector.Square peg, round hole problem. Where can I get a fitting connector/adatpter. All adapters here - for European Insights - have the round HF
Corkonian is offline   Quick reply to this message
Old 12-27-2017, 09:35 PM  
Senior Member
 
gms24ru's Avatar
 
Join Date: Mar 2017
Location: Krasnoyarsk, Russia
Posts: 210
Default

Quote:
Originally Posted by Corkonian View Post
WTF? The JDM loom has a square radio HF connector. My adapter has a round HF connector.Square peg, round hole problem. Where can I get a fitting connector/adatpter. All adapters here - for European Insights - have the round HF
You can open the radio and output the wire directly from the board.
Or cut the wires, or pull the pin out of the plug, or use the pin-mother from the other plug (for example, from a computer power supply).
__________________
Honda Insight II 2010 RHD Silver G-Edition Japan
Electric Train H710MK124RU Japan-Krasnoyarsk

To view links or images in signatures your post count must be 2 or greater. You currently have 0 posts.

Telegram:

To view links or images in signatures your post count must be 2 or greater. You currently have 0 posts.
gms24ru is offline   Quick reply to this message
Sponsored Links
Advertisement
 
 

Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the Insight Central: Honda Insight Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:
Location (Required)
Where you live
Insurance
Please select your insurance company (Optional)

Log-in

Thread Tools

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Powered by vBadvanced CMPS v3.2.3

All times are GMT -4. The time now is 05:13 AM.



Powered by vBulletin® Copyright ©2000 - 2019, vBulletin Solutions, Inc.
User Alert System provided by Advanced User Tagging (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.