Honda Insight Forum banner

master cylinder

  1. Master/Slave Cylinder or Clutch or Both?

    Problems and Troubleshooting
    Hi All, I have recently experienced some issues with putting my 2000 Insight into gear (197k miles). Yesterday I was unable to put it into first gear at all and when I tried, the car kind of dipper a little in the front. I think it may be an issue with the Master-Slave cylinders, but also...
  2. Please look at your Good Clutch Master Cylinder.

    Problems and Troubleshooting
    I'm having a clutch problem and hope to get someone to let me know if a good clutch pedal also looks like the picture below. The picture is of the master cylinder shaft from the inside of the car at the top of the clutch pedal. The black gunk up there could be hydraulic fluid, or could be old...
  3. Loose master brake cylinder cap

    Troubleshooting and Problems
    Sorry if there are postings on this already but I cannot find them. My brake master cylinder cap appears and feels loose. THe arrow on top is about 15 degrees from straight and the cap locking tabs do not look turned all the way into lock detents. The cap feel loose fitting, too. However...
Top