Honda Insight Forum banner

rust

  1. Problems and Troubleshooting
    Hi - I am relatively new to Insight ownership, having bought a 2002 manual 14 months ago. I promised to fix any faults last summer, but somehow I didn’t get around to it. And so far have basically done nothing except cover 6000 miles to take the total to 149k. Probably due to our awful weather...
  2. Honda Insight Forum 1st-Gen Discussion
    Hello Insighters, I have a few questions about the heat and A/C on my 2004 CVT Insight. I've owned my Insight for about 2 1/2 years. For most of that time, I've had the A/C set to Auto and haven't touched it (i.e. the thermostat does everything). Recently, I started manually selecting the A/C...
  3. Problems and Troubleshooting
    Two weekends ago, I cleaned the EGR passages plate. That went well. In doing so, I found the steel tube connector for the vacuum hose that powers the fuel pressure regulator. It was rusted to the point of leaking vacuum. With engine idling, spraying some carb cleaner or similar at the tube...
  4. Problems and Troubleshooting
    Heat shield bolts have rusted away from heat shield & it's now held only by the hole for a sensor plug. Would it be OK to sort of wrap it w/ wire to hold it in place? I don't look forward reaching in, down or up, to unscrew the probably-rusty sensor in still-winter temps.
Top