Honda Insight Forum banner
srs
1-7 of 7 Results
  1. Problems and Troubleshooting
    Background: This probably started shortly after or when I had a 12 battery problem but it might be useful to note I also have the wet seatbelt problem.. And since I have poor IMA battery codes that I am managing and waiting on a new battery. There are thread about all these. Most recently I...
  2. Honda Insight Forum 1st-Gen Discussion
    Back story: Dealing with an ailing battery 12v disconnect about three times in the past two months. Recently the SRS (airbag) light came on. I suspect the seat belt might be throwing the light, as I am dealing with the wet seat belt problem. Today: I was trying to jumper the OBDII port to...
  3. Problems and Troubleshooting
    My SRS light came on after the car was flooded yesterday. I have dried out the ECM which cleared the check engine light, and the IMA light which were on after the flood. I tried to have the parts store read the codes, but they could not get a connection. (before I dried out the ECM so I may try...
  4. Troubleshooting and Problems
    Hi everyone, I was in a very minor accident this weekend with my 2010 insight. Aside from one scuff on the front bumper, there's no visible damage. However, after the accident the SRS system was rendered disabled-the air bag light came on and the drivers side seatbelt stopped working correctly...
  5. Honda Insight Forum 1st-Gen Discussion
    Hi all... A problem has cropped up with some fraying on my drivers side seatbelt ( right hand side as we have our steering wheels on the right here) So I am faced with a very expensive new belt assembly, or hundreds of dollars for a second hand one. gen1 insights were never sold new here so...
  6. Honda Insight Forum 1st-Gen Discussion
    Does anyone know what could signal a faulty passenger airbag. Honda have had recalls but not for the Insight Gen 1. My SRS light came on and the local Honda dealership say the unit needs replacing. They need to hire a tool from Honda to enable them to do this although it is a simple job at only...
  7. Troubleshooting and Problems
    My 2010 insight had an accident. The air bags blew up. I changed all air bags, belts, sensors and the module. After I connected the pin 4 and 9 In the OBDII plug it shows a DCT14-7 error. What does it mean this error, would you also tell me where can I find the MES(Memory erase signal)?? Thanks
1-7 of 7 Results
Top