Honda Insight Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-6 of 6 Results
  1. Honda Insight Forum 2nd-Gen Discussion
    Fellow Insight operators, I’ve been loving my 2012 Insight ever since mom gave it to me more than a year ago. All was well for its entire life, up until it had the excessive oil consumption issue (cylinder walls were very badly damaged) and the service bulletin put out by Honda allowed me to...
  2. Problems and Troubleshooting
    I have a 2000 Insight 5spd with about 150,000 miles. The other day when on the freeway I had someone suddenly pull out from the service lane with no warning while still not moving as I approached at about 65-70mph. The car next to me on the left had a few cars behind him tighly packed so I was...
  3. Problems and Troubleshooting
    Two different and perhaps related issues. I bought my 2000 Insight on eBay (!) with some 130K miles on it and since then I have put in some 15K miles. The lifetime MPG was 54.9 when I bought it and I raised it to 55.2. Then my daily MPG started dropping to something near 53.5. Same commute, same...
  4. Buy/Sell Insight-Related Items
    I would like to possibly get a new or used EGR valve for 1st gen Insight. Going to try cleaning mine first. If that doesn't work, I'll need to buy another one. I'd rather not spend the $165 for the new one, so I thought I'd post here first... Thanks, Dan
  5. Honda Insight Forum 1st-Gen Discussion
    I just recently bought this car with 240K on it and adjusted the valves, I noticed that while rotating the engine over to get TDC that only the left intake valve (as you look at the engine) were being pushed down by the cam? The right intake valves don't appear to have a cam roller, being new...
  6. Honda Insight Forum 1st-Gen Discussion
    We adjusted the valves on my Uncles Insight this morning. We looked for a write up with pics before we started but didn't find one (Maybe I just didn't look hard enough, not sure)...Anyways we photographed the process in case it would help anyone out in doing their own valve adjustment, it's...
1-6 of 6 Results