Honda Insight Forum banner
Status
Not open for further replies.
1 - 20 of 196 Posts

· Registered
Joined
·
97 Posts
Discussion Starter · #1 ·
I have a silver 2000 MT with around 150k that was hit on the drivers side. Many useable plastic pieces and body parts. Also IMA and battery pack that will need to be reconditioned. Let me know what you want and I'll see what I can do.
 

· Registered
Joined
·
51 Posts
I have a silver 2000 MT with around 150k that was hit on the drivers side. Many useable plastic pieces and body parts. Also IMA and battery pack that will need to be reconditioned. Let me know what you want and I'll see what I can do.
have a non ac car how much for all the ac components shipped to Tennessee 38552
 

· Registered
Joined
·
97 Posts
Discussion Starter · #3 ·
have a non ac car how much for all the ac components shipped to Tennessee 38552
have a non ac car how much for all the ac components shipped to Tennessee 38552
I could do it for a hundred bucks plus shipping. Compressor, piping, condenser, evaporator, dryer and cooling fan. IDK what you're gonna need as far as wiring and controls.
 

· Registered
Joined
·
51 Posts
Thanks for the fast reply
does that include the compressor bracket ?
Was the condenser damaged in the wreck ?
I would like the controls off the dash if available
any ides on shipping cost ?
thank you so much
 

· Engine-Off-Coast
Joined
·
2,782 Posts
Just weighing in:
Compressor doesn't have a bracket. It has 4 bolts directly to the front of the engine.
You should buy a new condenser off Rock Auto regardless. New dryer unit too.
I think you'll also need the idler pulley assembly. IDK if the non-a/c Insights had that.
 

· Registered
Joined
·
1,325 Posts
Do you have the aluminum panel on the bottom of the car, immediately behind the front bumper? The one with the bumps on it. If so, how much including shipping to Colorado 80907?

Never mind, I realized I can 3D print the bumps. :)
 

· Registered
Joined
·
97 Posts
Discussion Starter · #8 ·
$ 100 for the ac parts is very fair
if you can please answer my couple questions and quote shipping I can pay and we can move forward
thanks for your time
Gonna take a while to get it all taken out. Condenser is fine and I'll get the control out for you. I'll give you a full price after it's all out and weighed.
 

· Registered
2000 Honda Insight
Joined
·
733 Posts
I think you'll also need the idler pulley assembly. IDK if the non-a/c Insights had that.
The idler bracket is the same, but the actual pulley is different.
 

Attachments

  • Like
Reactions: Natalya

· Registered
Joined
·
97 Posts
Discussion Starter · #16 ·
How 'bout $200 plus shipping
Wow, yes. Thank you! I can get the money to you as soon as I get a photograph of the catalytic converter. I can either e-mail you a shipping label or pay for shipping as you said, whichever is easier for you.
Yeah, let's wait until I have it out and have a pic.
 

· Registered
Joined
·
126 Posts
Wow, yes. Thank you! I can get the money to you as soon as I get a photograph of the catalytic converter. I can either e-mail you a shipping label or pay for shipping as you said, whichever is easier for you.
Can I also buy all the interior plastic screw covers behind the seats, if yours aren't missing?

Also I know it's a long shot, but you wouldn't happen to have the Insight-branded floor mats, would you?
 

· Registered
Joined
·
97 Posts
Discussion Starter · #20 ·
Can I also buy all the interior plastic screw covers behind the seats, if yours aren't missing?

Also I know it's a long shot, but you wouldn't happen to have the Insight-branded floor mats, would you?
Could you send a pic of where you're talking about behind the seat. I think it' s a no on the floor mats but I'll check.
 
1 - 20 of 196 Posts
Status
Not open for further replies.
Top