Honda Insight Forum banner

custom wilwood front brake 11" rotors.. turboer must se

2512 Views 10 Replies 6 Participants Last post by  Guillermo
I started collecting parts to turbo my insight since last year, got most of the parts ready... i hv alway do brake and suspension mods be for i move on to power mods for all the cars that i have/had...not excecption to the insight.... so i gave wilwood all the measurement that they need to put together a 4pot caliper brake kit.... didn't took them too long ...hehe
I just got the kit today and test fited, everything was as i wanted ^^...
it too late and im too tired...i will put the kit on at my shop tmr
1 - 1 of 11 Posts
First please review the rules regarding pics in posts.

http://www.insightcentral.net/forum/viewtopic.php?t=42
(specifically rule #7)

And please note each individual pics size limits too. Remember many members are still on dial-up and one too large with too high a resolution can take several minutes each to load for viewing.

The number you apparently tried to post would have likely resulted in their removal to links only. And since you only posted the paths as they exist on your harddrive I edited your post above to remove the invalid use of the img function.

The pics must already be uploaded to the web somewhere first for the img function to "work". See the link in my sig for one domain choice. Then see:

"Sticky" (top of the list)
General Discussion
F.A.Q.: Adding Pictures to Your Post
http://www.insightcentral.net/forum/viewtopic.php?t=453

HTH! :)
See less See more
1 - 1 of 11 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top