[DonWatson3558]

Today, I received in un-opened boxes, Honda Insight floor mats for my 2004 CVT. The driver side bo DID NOT CONTAIN the fastening bolt (or grommet) that I have heard about.

Does anybody know the Honda Part number for it? I saw it posted here somewhere, and have searched and searched but can not seem to find the post which contains the part number.

By the way, I got floor mats thrown-in from the dealer. The first set they sent me were the part number for 2000-2003 floor mats, and were Gray. I told them they were the wrong ones. I called Honda and got the part numbers for the 2004 floor mats (they matched what http://www.hondaaccessories.com) had for the 2004 floor mat part number. As I said, received them fresh in the box today .... and they were also Gray (with no bolt/fastner/gromet on the driver side).

I can't detect any difference in 2000-2003 and 2004 floor mats.

Anybody know the part number for the grommet/fastener/bolt on the drivers side?

Thanks.

 

[DonWatson3558]

I found the part number ...

Edited Note: I called Honda to verify the part number I found on the web site mentioned below, and it is an invalid part number. Also, they were unable to give me a valid part number. Good grief!

--------------------------------------------------

finally found the part number on a web site. The part number is 08P15-3SY-100R1 and is called "FLOOR CARPET HOLDER". List price $6.97.

Found it here:

http://64.233.161.104/search?q=cache:RT ... mmet&hl=en

 

[Rick]

Thats wierd they decided to quit including it. I sware it came in the box with my floor mats.

 

[drktrpr]

It came with my mats when I purchased them.

 

[jsanford]

Try http://www.partsvoice.com. Part numbers on that site come from dealers or their licensed representatives.

One cool feature is that superceded parts numbers are also listed.

I think they may be more detailed for American brands, but you never know.

 

[ilusnforc]

When i got my '00 insight used.. it had no floor mat anchor and the first thing i noticed while driving is the floor mat sliding up under the pedals, so i ordered the anchor from my dealer.

P/N: 08P15S3Y100R1
Cost: $9.76

Installation: Easily installed in about 30 seconds with a sharp knife, a phillips head screw driver, and a strong thumb. Good luck!

 

[SPeacock]

I received my floormats (from a third party) and they didn't include the nipple.

I dropped into my friendly Honda Parts area. They ordered a HONDA set of mats with the idea of just getting the plastic holder. The mats came in and sure enuf, the plastic doohicky was not included.

They finally just ordered one (actually 1/2 doz). Charged me nothing.

My problem now is that the mat won't stay on the nipple. I've drilled the nipple and added a catch pin on top. I suspect there is a keeper of some kind that must press on top...but I was not going to try go thru explaining THAT to the parts guys.

 

[Jim Holmgren]

Plastic??
Mine is a (solid) metal holder that screws into the floorboard. Let me know if you would like a picture - I can snap one and put it up on my website for you to see.
http://www.littlebluespitfire.com/gallery/Insight

 

[apierpoint]

My floor mat kept sliding up under the clutch, so I was looking for a solution, so of came here first, of course.

I thought about just finding a very short bungee cord to hook onto the grommet on the floor mat and hooking the other end to the hole under the seat, but I thought, "What the heck? Maybe the dealer will have something."

So, I call Trickett Honda in Goodlettsville, TN, and tell them what I'm looking for, and they say "yeah, we have that piece in stock, and it's only a couple of bucks." I leave immediately and get there 10 minutes later, the parts guy remembers talking to me on the phone, and he GAVE it to me for FREE, and then one of the service guys installed it for me, also for FREE.

So, I know you guys don't normally like going to the dealers, but I have to say, Trickett so far has been great, and they just earned lots of brownie points with me for not making me pay for any of that.

I don't know the part number, but for others looking, the dealer should know what it's called.

Just FYI...

 

[Jackmpg]

Floor Mat Holder

Hi All,
Going to the dealer tomorrow to pick up my floor mats, I guess we'll see what's in the box. They ordered them for free with the car which was very nice of them. Thanks for the part number just in case... Jack

 

[Jackmpg]

Carpet Holder

Hi All,
Yep, Floor Carpet Holder not in box, have one on order pn 08P15-S3Y-100R1. Jack

 

[rsalmon]

Jack,
If they end up saying they can't get them, I have a couple extras.
Rich