Honda Insight Forum banner
1 - 1 of 1 Posts

· Registered
2,341 Posts
Should.... but I'd check that diameter to be sure. There might be some clearance issues on both the front and back.

The stock wheels are
with a +45mm offset
4X100mm bolt pattern

Be very careful though, something that wide is going to have a fat tire and the Insight doesn't really cope too well with a lot of rolling resistance. Plus your probably adding a lot of weigt to the wheels. If you do try them don't discard your stock wheels just yet.
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.