Honda Insight Forum banner
1 - 1 of 1 Posts

· Registered
39 Posts
Discussion Starter · #1 ·
I would like to get to the “connector side” of the under hood relays. The box with the horn, lights, and other relays. I would like to route the horn switch line out the bottom of the box. I looked at the “large” Phillip’s / hex screws at the top, near the edge closest to the driver, but that didn’t seem to be it. Do I have to unbolt the box from the car? I would appreciate some help. I am probably just not seeing the screws holding the tray in.

1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.