Honda Insight Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
652 Posts
In regards to the temp probe I put the wire through the passenger side passthrough opening in the firewall. Put the probe somewhere where it gets air but not artifical heat such as next to the radiator. I think you will learn to like the anti-glare aspect as much or more than the temp and compass. In regards to GPS I use a streetpilot III and just put it on the dash (Hopefully the next Insight will have a built in system. Have fun, Rick
 

·
Registered
Joined
·
652 Posts
The easiest way to replace the mirror would be to use a mirror that uses the same button but unfortunately Honda has several styles and the one that donnelly has is probably for the Civic. I am sure there is a better way but I used a razor scraping knife and a rubber mallet. (I figured the razer would break before the windshield.) I like the idea about the repair shop as I am sure you could break the glass. Perhaps they have a tool or glue disolving chemical to play it safe. About a year ago I was carrying some large cargo (Two large footlocker containers) and removed the front seat to place one up front. Anyway I hit the mirror when I put the container in the car and it fell off along with a chunk of the glass so that glue holds well. I just put more of the glue on for a glass to glass bond and it has held up well. I also decided not to use my insight like a truck. Have fun, Rick
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top