Honda Insight Forum banner
1 - 1 of 32 Posts

· Premium Member
3,304 Posts
FYI: The Arduino bypass will keep the CEL light off forever.
FYI: I'm about to release LiBCM, which completely replaces the OEM NiMH hybrid battery with a modern, lithium version. It won't be released prior to your upcoming inspection, but if you can limp by with the Arduino bypass, then LiBCM could bring wonderful new life to your IMA system. Note that LiBCM requires the unmodified OEM IMA wire harness, whereas the Arduino bypass cuts it into pieces... you can do the Arduino bypass without hacking the IMA harness to pieces... just de-pin the required connections.
If I could get access to the stupid plugs I would make the harnesses myself for a small cost to help people not chop up the harnesses, but alas, I cannot.
1 - 1 of 32 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.