Honda Insight Forum banner

Jacking points...

5159 Views 13 Replies 8 Participants Last post by  Billy
These are pics from under my Insight. Are the circled areas jacking points (i.e. good points for a floor jack).

1 - 1 of 1 Posts

· Registered
85 Posts
nope the jack points are along the seam where the body sheetmetal meets under the door lip you should notice a slight reinforcement if not check with your manual or some one that is used to working on unibody cars. what appears that you have circled would put a dent in your floorboard
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.