[Willie Williford]

There are three points on each side for jacking. Jack in the middle one on each side, (about mid door location) put a jack stand under the front jack point and the rear wheels will be on the ground. Lots of room for a creeper underneath. I believe the owners manual shows the location of the jack points. By jacking in the middle, one side will be completely off the ground allowing the jack stand to be put under the front point. Or else get a set of ramps and drive up on them. Rhino ramps are the ones to use. if my memory is correct..........Willie

 

[Willie Williford]

It is a lot easier if you jack at the center jack point on each side. Place Jack stands under the front jack points. Let the vehicle back down on the rear wheels. Thats the way I do it for oil changes and while I did the modifications to my Insight, and the vehicle was on the jack stands for app. 2 months. Lots of room for a creeper underneath. .....Willie*