[thibble]

funny that I just found this thread but been running the display quite a while . One more thread to watch.

 

[thibble]

I've been doing so well on old lidisplay with old libcm main that I'm afraid to guinea pig the merge . Waiting till Mudder does the 'official' merge to main. Been gunshy ever since I toasted my pack.

 

[thibble]

I just loaded the same build you have:
LiBCM Firmware: GitHub - Lady-Natalya/Honda_Insight_LiBCM-1 at lidisplay
.tft for NX4832K035_011: GitHub - Lady-Natalya/LiDisplay: LiDisplay for LiBCM

I've made no config changes, and not seeing charging screen. I have disconnected and reconnected to GC, but not a drive in-between. I'll try that next and see what happens.

 

[thibble]

Next: Nope, no change. Wait for the relay to click after engine shutdown. Hook to AC power, no lidisplay. I'm on (hit enter to fast), a rev B board, but from what mudder related about only for bigger/faster GC, doubt it's related.

Thibble, do your SOC bars update while driving, or do they only update after key-off / key-on. I may have brought this one upon myself by pretending I can edit code, so I have hesitated to post about it.

I do have bars update while driving. The buttons on display still inop (known bug).

 

[thibble]

Thank you. I will take a look and see where I went rogue. My experience with GC screen: If I plug in very quickly after key-off, I receive the GC screen. (Plug in before contactor opens)

I can try that. Mine is almost always on GC It isn't driven often at all.