Honda Insight Forum banner
1 - 1 of 10 Posts

· Registered
204 Posts
Trimming speaker covers...

If by trimming the stock speaker covers you mean hollowing them out some to make room for the tweeter, I did mine easily with a Dremel with a grinding stone attachment. If you start out slow, it would be hard to mess up doing it this way.

When I had ground out enough, I removed all the plastic burrs and hit it quickly with a heat gun. Looks good (not that you ever see the inside).
1 - 1 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.