Honda Insight Forum banner
1 - 15 of 15 Posts

·
Registered
Joined
·
2,448 Posts
I'd go for black if your keeping the black plastic surrounding (trying to mentally picture the CVT shifter). I've got a black leather boot with a black shifter ball on mine which looks pretty good.
 

·
Registered
Joined
·
225 Posts
Also make sure the shifter drops down far enough. As you can see from my pic, the boot sits very low on the stick and leaves a goofy looking gap. You probably won't have ths problem on the CVT though.
 

·
Registered
Joined
·
2,448 Posts
ext1jdh said:
Also make sure the shifter drops down far enough. As you can see from my pic, the boot sits very low on the stick and leaves a goofy looking gap.
If you get a proper shifter boot and you won't have this problem.
 

·
Premium Member
2001 5S "Turbo"
Joined
·
11,987 Posts
shifter

Why not use a "t" handle shifter?

I'm from the OLD SCHOOL and have a Hurst's aluminum T handle shifter on my 5 speed. It would work great on a CVT.

It has been installed on three of my last vehicles and will go on my next vehicle. (Possible 06 Insight?)
 
1 - 15 of 15 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top